Brandmotion 9002-9650 User Manual download pdf

9650 Instructions 2-11-14.doc Page 1 of 2

9002-9650 Installation Instructions (Slimline 3.5” Auto Dimming

Display Wedge Mount Mirror with HomeLink)

IMPORTANT: Check kit contents and read instructions before installing. For the latest full color instructions please visit

www.brandmotion.com

Kit Contents

Slimline Auto Dimming Mirror with 3.5” Display & HomeLink Mirror Harness

Homelink Programming and Information Guide These Instructions

Mirror Mounting

NOTE: This mirror has a Wedge/ D-tab style mounting base; please check our Application Guide to ensure it is compatible with your

vehicle. Additionally, Brandmotion offers windshield mirror adapter brackets, Kit # 5000-VWAB (some Volkswagen vehicles) and Kit

#5000-CAMLOCK (some Honda & Subaru vehicles), available separately.

NOTE 2: In some cases, it may be necessary to remove a cover to access the wedge mount on the windshield and/or modify the

cover slightly to clear the mirror mount. Additionally, if your vehicle is equipped with a mirror cover, mirror adjustability may be

restricted.

To install:

1. Loosen vehicle mirror screw using a T20 Torx driver and remove

existing vehicle mirror.

CAUTION: Do not twist mirror as windshield damage could result.

2. Carefully slide supplied Mirror onto windshield tab.

3. Torque supplied Mirror screw to 1.8 Nm (16 lb-in) and do not exceed

2.2 Nm (19.5 lb-in).

Mirror Wiring

1. Use a multimeter to test for vehicle Igniton (+) and Reverse (+)

signals. Typical locations are behind the driver or passenger side kick

panel or under the dash. Set parking brake, start vehicle, and have

an assistant shift into Reverse while you test for Ignition and

Reverse signals.

2. Plug Mirror Harness into Mirror and route beneath

headliner and down the A-pillar closest to the

Ignition and Reverse signal locations.

3. Splice Mirror Harness wires to the following required

connections:

Red - Ignition controlled power 12v+ when key is

Black - Chassis ground. A ground bolt is commonly

found in the front kick panel area with other

wires attached; in some cases you may

need to supply a new screw.

Green - Connect to Reverse (+) 12V power.

NOTE: While not a required connection, connecting Reverse

disables the vehicle’s auto dim function while vehicle is in reverse.

4. Connect female RCA plug on supplied Mirror Harness

to male camera RCA.

Mirror & Mirror Harness Pinout

MIRROR

WIRE

COLOR

MIRROR

HARNESS

WIRE COLOR

FUNCTION

Purple

White

Video (+)

White

Brown

Video (–)

N/A

Not used

N/A

Not used

N/A

Not used

Red

Ignition (+)

Orange

Green

Reverse (+)

Black

Ground

N/A

Not used

N/A

Not used

These instructions only pertain to functions on the supplied

mirror and do not support other vehicle features.

1 2

Summary of Contents

Page 1 - Mirror Wiring

9650 Instructions 2-11-14.doc Page 1 of 2 9002-9650 Installation Instructions (Slimline 3.5” Auto Dimming Display Wedge Mount Mirror with HomeLink

Page 2 - 87a Not used

9650 Instructions 2-11-14.doc Page 2 of 2 Camera Requirements The camera signal must be strong enough for the mirror to detect signal when reverse

Comments to this Manuals

No comments

Brandmotion 9002-9650 User Manual

Browse online or download User Manual for For the car Brandmotion 9002-9650. Brandmotion 9002-9650 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Brandmotion 9002-9650